Sunday, November 30, 2008

Speedy Cable Beret Pattern


May 28, 2009 update: It seems this pattern has been very popular on Ravelry, with 111 projects so far! However, a good number of people have said that the pattern fits more like a beanie than a beret. The one I made for Julia seemed beret-like on her, but variations in gauge, head size and yarn might account for the differences. Fortunately, most of the knitters were still happy with the results, but this is a warning that your beret might turn out not so beret-like. I suggest you browse the project photos on Ravelry to get an idea of how the hat looks made up in different yarns. (Note that you need an account on Ravelry to see them.)

Dec. 2, 2008 update: there is now a matching cowl pattern.

Julia asked for a beret to match her legwarmers, so I decided to experiment with some Sirdar Big Softie yarn I had available. This stuff is super chunky yarn and it took me just over an hour to make the beret. I've included the pattern below. If you make it, keep in mind the headband is fairly loose, so the beret looks appropriately slouchy.



Materials:
2 skeins Sirdar Big Softie
8mm and 10mm knitting needles

Gauge:
9 stitches and 12 rows over 4-inch square using stockinette stitch.

Abbreviations:
M1: Make an additional stitch by working into previous row between current and next stitch.
C4: Place next two stitches on a cable needle and hold in front of work. Knit next two stitches on left-hand needle. Then knit two stitches from cable needle.
K2tog: Knit two together.
P2tog: Purl two together
SSK: Decrease with a slip, slip, knit.

Instructions:
Using smaller needles, cast on 49 stitches.

Start ribbing.
Row 1: *P2, K2*. Repeat from * to * until last stitch. P1.
Row 2: K1. *P2, K2* Repeat from * to * until end of row.
Repeat rows 1 and 2 once.

Switch to 10mm and repeat rows 1 and 2 of ribbing again.
Increase for main part of the hat.
Next row (RS): *P2, M1, K2, M1*. Repeat from * to * until one stitch remains. P1. (73 stitches).
Next row (WS): K1. *P4, K2*. Repeat from * to * to end of row.

Start cable pattern.
Row 1: *P2, K4*. Repeat from * to * until one stitch remains. P1.
Row 2: K1. *P4, K2*. Repeat from * to * to end of row.
Row 3: *P2, C4*. Repeat from * to * until one stitch remains. P1.
Row 4: Repeat row 2.
Row 5: Repeat row 1.
Row 6: Repeat row 2.

Repeat rows 1 to 6 of cable pattern.

Shape crown.
Next row (RS): *P2, K2, K2tog*. Repeat from * to * until one stitch remains. P1. (61 stitches)
Next row (WS): K1. *P3, K2*. Repeat from * to * to end of row.
Next row (RS): *P2, SSK, K1*. Repeat from * to * until one stitch remains. P1. (49 stitches)
Next row (WS): K1. *P2, K2tog*. Repeat from * to * to end of row. (37 stitches)
Next row (RS): *P1, SSK*. Repeat from * to * until one stitch remains. P1. (25 stitches)
Next row (WS): K1. *P2tog*. Repeat from * to * to end of row. (13 stitches).
Next row (RS): *K2tog*. Repeat from * to * until one stitch remains. P1. (7 stitches)

Cut yarn, leaving long tail, and draw through remaining stitches. Pull tight and sew seam.

Note: Minor correction was made to pattern on Dec. 2, 2008. Second row of crown shaping originally had a *P4, K1* repeat. This was changed to *P3, K1*. Thanks to the knitter who spotted this error.

Note: Another correction made on Jan. 19, 2009. Changed second row of crown shaping to have a *P3, K2* repeat. Sigh ... can't seem to get this row right!

40 comments:

Em said...

I love it! My daughter has been asking for a "cool hat that doesn't look like mom made it". I think this fits the bill!!!

Empty Juicebox said...

omg that looks so awesome!
i think im gonna make a few as xmas presents :D

Anonymous said...

The hat looks wonderful and easy to do. One question though: did it stay on her head as she skied down the hill? :o)

MrsPi

Paulina said...

MrsPi: A toque or helmet would definitely be better for skiing! Can't get my teenager to wear a toque, though, even when it's freezing cold outside, so something that barely covers her head will have to do! :-)

Jonnie said...

Hello. I just made this hat. But, I had a change for line 2 of the crown shaping. Shouldn't it be K1, *P3 K2*?? There was a 5 stitch repeat on the prior row (P2+K2+K2T = 5). Or, at least, that's how mine turned out. And, my stitch count came out the same as yours. Anyway, started last night, finished today and LOVE THE HAT! Thanks for posting the pattern. :-D
Jonnie

Paulina said...

You're absolutely right, Jonnie. I've made the correction. Thanks for spotting the error!

Anonymous said...

Wow, this is a great pattern !
I'm trying to make this hat right now and I was wondering if I could use yarn that is supposed to be used with size 11 needles ?
Should I use size 10-10 1/2 [6-6 1/2] needles where it calls for 11 [8mm] and 11 [8mm] needles when it calls for 15 [10mm] ? Would this work and would I get the same results ?
Thank you very much !
:]


-Jelly

Paulina said...

Jelly, if you're using yarn that's meant to be used with size 11 (8mm) needles, then your gauge will probably be different. I suggest you do a test swatch to see how much smaller your piece is.

You can then do one of two things. You can add cable repeats both lengthwise and widthwise to get the required dimensions. Your hat won't be as thick as the original. You can also try holding two strands of your yarn together to see if you get something similar to what the Sirdar Big Softie yarn gives.

I also recommend you get an account on Ravelry if you've not done so already. There are over 70 people who have done this project and they've posted photos, information about their yarn choices and comments. There have been some who have adapted this pattern for a thinner yarn and it may be helpful for you to read their comments about how they had done it.

Anonymous said...

Would this pattern work with DPN so that there wouldn't be a seam to sew at the end?

Paulina said...

Yes, certainly you can make this beret with DPNs. Just omit the last stitch at the end of the right-side rows. This stitch was added solely for seaming. I wrote the pattern for straight needles, just because I figured most people wouldn't have DPNs in such large sizes.

Gwendolen Gross said...

lovely! So quick--thank you very much for sharing!

Alex said...

Do you mind giving me the measurements? Like: 1. How many inches it is around the ribbing (just so I can see if it fits my head haha) and 2. How tall the hat is
Thanks

Paulina said...

Hi Alex,
I'm afraid I can't offer the exact measurements right now, as I'm out of town. Also, I'm not sure I'll be able to find the exact sample I used anyhow! In any case, I would actually recommend doing a gauge swatch with the cable pattern, so you can see how wide and tall a cable repeat is. Then, you can customize it to fit your head. The ribbing is very stretchy, so just make sure you don't cast on too tightly and it should fit most heads. I suggest you check out the many comments on Ravelry on the projects page for tips on making sure the size is correct, especially if you're using a different yarn.

jinguin said...

Great pattern! I've been looking all over the place for one. I do have one question though--if I wanted to make it more slouchy in the back, do know how I could do that?

Thanks!!

Paulina said...

Jinguin, you can probably make the beret more slouchy by adding a few rows and making the beret longer. If you have an account on Ravelry, you can check out the project photos and comments. Several people have made the beret more slouchy and have left notes about how they've done it and added photos so you can see if you like the final result.

Sarah said...

wow i love your pattern. I have 2 skeins of 50g/53yrds wool. the gauge is 16 rows of 11 stiches for a 4inch square on 7mm needles. Can I still knit your pattern? What ajustements should I make and do you think I have enough wool??? thnx!!!

Sarah said...

Wow, I love this pattern! I would like to knit it with 2 skeins of 50g/53yrds wool. will that be enough? the gauge is 16 rows, 11 stitches make a 4inch square on 7mm needles. what changes should I make to the pattern? thnx!!!

Paulina said...

Hi Knitting Addict. You could try using 8mm needles to see if you get get the correct gauge. If you do, then you should have enough yarn. I recommend you look up this pattern on Ravelry. A number of people have done it in different yarns and have added notes. Some have adjusted the pattern (by adding stitches) to make it work for different gauges. You might even find that someone else has done it in the same yarn you have.

Maricle said...

Hi and many thanks for this great pattern! Would accept that I publish a french translation on my blog with a link to yours? I've just begun it and I'm in hurry to post it!

Paulina said...

Yes, Marie, you are welcome to post a translation. Glad you like the pattern.

PixelatedMushroom said...

This is lovely - thanks so much for sharing!

erinelizabeth27 said...

This is a great pattern, thanks so much for posting it! I did have a question though, when you give the gauge for the pattern, are you using this with the 11 or 15 needles?
thanks!

Paulina said...

Thanks for your comments, purlknitrepeat. I did the gauge with the larger needles that are used for the majority of the knitting.

Unknown said...

Dear Paulina,

thankyou for posting this pattern, it looks great!
I occasionally have the opportunity to sell some of my knitted creations to friends. I am keen to obey copyright laws however, so was wondering if it would be appropriate for me to sell any versions of this pattern which I knit, providing that I credit the pattern to you?

Kind Regards,

Carolyn

Paulina said...

Carolyn, I ask that, in general, knitters not sell items made from my patterns. However, I have, in the past, had requests from people who want to sell items for charitable purposes or use the patterns for teaching purposes, and those uses have been OK with me. Thanks very much for asking first. I do appreciate that.

Given that you've been successful at selling your knitted items to friends, perhaps you might want to try designing patterns yourself, even ones customized for the people you sell to. It's not that hard to come up with a pattern for a basic hat, mitten or scarf. That way, you won't have to worry about copyrights.

Alyx Sands said...

Best hat pattern ever-made two already, and they only take 3 hours to make per hat-even for an inexperienced knitter like me. They fit like a beret for me, too (used Malabrigo Rasta)- finally something great looking I can knit as a present that doesn't cost me lots of grey hair...

Mooseknits said...

this is a lovely pattern and seems very easy. I'm going to make one soon! I make lots of berets for friends and family. However, I have found that blocking berets really help enhance their shape. I quickly spritz them, and put a dinner plate inside them to shape them. Then, let dry for 24 hours. So easy!

Anonymous said...

Hi, can you be more specific about which technique you use to increase (make a stitch)? There seem to be quite a few ways to do it and want to make sure I use the right one :-)

Paulina said...

I use the increase that's commonly known as "make one", where you lift the yarn between the stitches on the previous row, place on your left hand needle, and knit into it, making sure you knit into the front or back (depending on how you slipped the yarn onto the needle) to avoid a big hole. If you search on the Web for "make one knitting", you'll find some videos to show how it's done. Some patterns distinguish between "make one left" and "make one right", but it doesn't matter much for this pattern.

Anonymous said...

Hi I was just wondering how much wool you ended up using. I have two skeins of 43yrds and I just need to know if I have enough or need to buy some more.
This is a great pattern though! I looked everywhere for one and this is perfect! :)

Paulina said...

I can't remember the exact yardage but I'm pretty sure I had a good amount left over from my 2 skeins of Sirdar Big Softie, which is 49 yards per skein. I think that two skeins of 43 yards will be enough. If you have a Ravelry account, you can browse through the projects for this pattern. Some of the knitters have left more detailed notes about their project, including yardage used.

Jerry from Maine said...

To those "Moms" who knit hats for their daughters who downhill ski...not too smart....as they should be wearing ski helmets,
but certainly would be fine
"after-ski"....

Paulina said...

It's true that this hat is not meant for downhill skiing. In our family, we always use helmets. You could wear this hat for cross-country skiing, but a tight toque would stay on better. :)

Laurisa said...

I want to knit this in the round

Do I cast on 48 and inc to 72
Change WS rows to RS rows (ie knit the K st and purl the P st)?

Thanks!

Paulina said...

Laurisa, that would work. If you go to the Ravelry page for this pattern, you'll see that a number of people have done this pattern in the round.

Emily said...

on the row where you p1, *ssk*, p1 and end up with 25 stitches, i keep getting 19 stitches! do you have any idea what im doing wrong?

Paulina said...

Hi Emily,
Sorry for the delay in posting. The instructions actually have you repeating *p1, ssk*, not just the ssk part. Hope that helps.

Donnachang said...

Paulina thanks for sharing. My nieces are getting the cowl and beret for Christmas. Quick knit that looks great.

Anonymous said...

Thank you for the pattern! I made it for myself and immediately got a request to make one for a friend at work, then going home for Christmas my Mum demanded one! Very quick and easy so I am more than happy to spend an evening or two on them after work.:)

Sarah Battyll said...

What a great pattern, I finished it in a short evening and wore it straight away to walk the dog. I cast on using 7mm needles and started the rib with 7's then went onto 10mm for the majority of the hat. It's not slouchy as such but fits a treat and looks super on. I'm going to have such fun knitting various versions and experimenting. Thank you for sharing ��